Skip to content
Solutions

Live streaming for creators, media and teams

The same broadcast engine, described in the terms each audience actually uses. Pick the one closest to your work.

Getting a team on air, step by step

The five pages above describe different teams. Underneath, the first broadcast is set up the same way for all of them.

  1. Start from the page closest to your work

    Pick the card above that sounds like your week. Each page has its own settings table, checklist and questions; this list is the part they share, in the order a first broadcast needs it.

  2. Pick how the feed reaches StreamRove

    An encoder you already own, such as OBS, vMix, Wirecast or a hardware unit, sends RTMPS by default, or SRT in caller mode with 500 ms latency on an unreliable line, with H.264 video and AAC audio. No encoder? The browser Studio is one. A finished video goes out through Upload & stream.

  3. Connect the destinations

    YouTube, Twitch and Kick connect in one click, Vimeo through a short form, TikTok once the account is confirmed. Facebook, LinkedIn, X and Instagram take a server and key pasted from the platform, and any other RTMP address is a custom destination.

  4. Set the encoder for the strictest destination

    One stream goes to all of them and has to fit the tightest limit; the table below lists each one. The bitrate calculator works it out for your combination and your upload.

  5. Decide who hears about problems

    Switch on Signal alerts for every stream that matters; they are off until you do. Alerts arrive by email and in the app, and can also reach Telegram or one webhook for Slack, Teams, Discord or Google Chat. They fire after a minute without signal, and when a single destination stops receiving.

  6. Choose what gets kept

    On paid plans, switch recording on and every broadcast of that stream lands in Storage as an MP4 until you switch it off. Recordings stay for your plan's retention period, and the owner is warned three days before one is deleted; download the ones you are required to keep.

  7. Rehearse before the first real one

    Studio teams press Start a private test: five minutes, StreamRove only. Encoder teams switch the destinations off and watch the preview. On the Control plan, run the holding slate as a 10-minute test so everyone has seen what viewers get when a feed drops, and check that the alerts reach the people who will act on them.

  8. Share it where people already are

    Besides the platforms, every broadcast has a share page and an embed for your own site, 640 × 360 unless you resize it; on the free plan the player shows a small StreamRove mark. On the Control plan, the share link can ask for a passcode, or for a name and email address, before it plays.

The limits every team works to

These are the per-platform figures built into StreamRove's output profiles and its bitrate calculator, for a 1920 × 1080 picture. With several destinations switched on, the strictest value in each column wins.

YouTube9,000 kbps12,000 kbpsUp to 60 fps128 kbps
Twitch6,000 kbps6,000 kbpsUp to 60 fps160 kbps
Kick8,000 kbps8,000 kbpsUp to 60 fps160 kbps
Facebook6,000 kbps9,000 kbpsUp to 60 fps128 kbps
LinkedIn5,000 kbps6,000 kbpsUp to 30 fps128 kbps
Several at onceWithin the lowest maximumThe lowest among themThe lowest among themThe lowest among them

StreamRove's advice for every platform: H.264 video, a keyframe every 2 seconds, CBR, and AAC audio at 48 kHz. Some platforms accept more on their own; a stream shared by several has to fit the lowest. An encoder's stream is passed on as it was sent, which makes these limits yours to meet; it is re-encoded only when something is drawn into it, such as the free plan's StreamRove mark or your own logo.

Which one is closest to your work

It is the same product, set up differently. What usually decides it is where the feed comes from, and what has to happen once the broadcast is over.

For creators

Typical broadcast
Several streams a week — gaming, talk shows, music, IRL.
How the feed reaches us
OBS or Streamlabs on your own computer, or the browser Studio when you have guests.
What matters most
Being live on Twitch, YouTube and Kick at the same moment without uploading three times, then cutting clips from the stream.

For media & publishers

Typical broadcast
Scheduled shows and breaking coverage, often from more than one location.
How the feed reaches us
A hardware encoder, vMix or OBS — over SRT when the link is unreliable.
What matters most
Staying on air when a contribution link drops, and an archive of everything that went out.

For tech & SaaS

Typical broadcast
Webinars, product launches and customer onboarding sessions.
How the feed reaches us
The browser Studio with remote speakers and screen sharing, or a pre-recorded demo scheduled to play out.
What matters most
Nothing breaking in front of an audience, LinkedIn alongside YouTube, and clips for the follow-up.

For government

Typical broadcast
Council meetings, hearings and briefings on a fixed calendar.
How the feed reaches us
An encoder in the chamber, over SRT if the building's connection is weak.
What matters most
Every session archived without anyone having to remember, and a player on the official website.

For worship

Typical broadcast
A weekly service, plus the occasional special event.
How the feed reaches us
OBS or a hardware encoder in the building, run by whichever volunteer is on that week.
What matters most
Going live with one button on the church's YouTube and Facebook together, and a recording for those who missed it.

One engine underneath all five

None of these is a separate product. Each page above describes the same five pieces, in the order a particular kind of team tends to need them.

  1. Multistreaming

    You send one stream and we deliver a copy to every destination you have switched on. Your upload carries one feed however many platforms you add, and each destination runs on its own, so one failing does not take the others down.

  2. Browser studio

    Guests join from a link with nothing to install. Scenes, layouts, screen sharing, name cards and overlays are switched live from a browser tab.

  3. Upload & Stream

    A finished video, or a rundown of up to 200, goes out as a live broadcast at the time you choose, and at the end it stops, loops or holds on a filler video. For rehearsed segments, re-runs, and services with nobody in the building.

  4. Recording & Clips

    On paid plans, switch recording on once and every broadcast of that stream is captured while it airs. Clips then turns sections of a recording into short videos, vertical or in their original framing.

  5. RTMP, RTMPS and SRT ingest

    Point the encoder you already use at one ingest URL. SRT holds up on lossy connections where RTMP stalls, which matters most in venues and public buildings.

Questions about choosing

Is there a different plan for each kind of organisation?
No. Plans differ by their limits and by a few features, not by who you are: recording comes with the paid plans, the holding slate and protected share links start on the Control plan, and your own logo comes with Guardian. A church and a software company on the same plan get the same product. Pricing lists the rest.
Can we keep the encoder and software we already use?
Yes. OBS, vMix, Streamlabs, Wirecast and hardware encoders all work: you change the server address and stream key they send to, and nothing else. RTMPS is the default way in; SRT suits a line that loses data. Send H.264 video with AAC audio. If you have no encoder at all, the browser Studio is one.
Which platforms can we reach?
YouTube, Twitch and Kick in one click; Vimeo through a short form and TikTok once the account is confirmed; Facebook, LinkedIn, X (with X Premium) and Instagram with a server and key pasted from the platform; and any service that accepts an RTMP address. Your own website takes the embeddable player rather than a stream key. Your plan sets how many destinations run at once.
Do viewers need an account with you?
No. They watch where they already are — YouTube, Twitch, Facebook — or on your own site through the share page and the embeddable player. Only the people producing the broadcast sign in.
Does adding more platforms lower the picture quality?
No. The stream is passed on to every destination as your encoder sent it, with no re-encoding per platform: the fifth platform gets the same picture as the first. Re-encoding happens only when something is drawn into the picture: the free plan's StreamRove mark, your own logo, or the Studio's output.
How does the team know a broadcast is in trouble?
The stream page shows a health score from 0 to 100, and Stream Doctor explains each warning in plain words: low bitrate, a frozen picture, dropped frames, silent or clipping audio, a long keyframe interval. Signal alerts reach email, the app, Telegram or a team chat after a minute without signal, and when a single destination stops receiving.
Can we broadcast to a private audience?
Yes. Leave the public platforms off and send the share page instead. On the Control plan, the link can ask for a passcode, or for a name and email address, before it plays. StreamRove does not take payments or sell tickets.
What happens to recordings afterwards?
They land in Storage as MP4 files you can download one by one or all together, or share by link. They are kept for your plan's retention period, and the owner is warned three days before one is deleted. There is no transcript, chapter list or public archive page.