Broadcast a recording as a live stream
Upload a video, or pick a recording you already have, and StreamRove plays it to your platforms as a live broadcast. Set a start time and walk away, or press Go live now when you're ready. You spend the hour in the chat instead of in front of the camera.
A pre-recorded broadcast needs no encoder and no computer left running. Our servers play the video in real time, at the pace it was recorded.
Why broadcast a recording
Nothing goes wrong on air
The crashed demo, the guest whose line dropped, the sentence you'd rather rephrase: all fixed in the edit. Viewers still get a show that starts at a set time, with everyone watching together.
You're in the chat, not on camera
The video runs itself, leaving you free to answer questions for the whole broadcast. The stream page gathers YouTube, Twitch and Kick chat in one read-only column; you reply on each platform.
On air when your audience is awake
Record when you're at your best and broadcast at the hour your viewers are free, even on the other side of the world. Pick the date and time, and it starts on its own.
Nobody has to stay up
A scheduled broadcast starts and ends on our servers. Your encoder can be off and your laptop shut. Change your mind and Stop broadcast ends it cleanly from any browser.
How it works
Upload once, use it again
Videos live in Storage and can go out as often as you like. Files up to 2 GB (MP4, MOV, AVI, MKV, WMV or M4V) upload in parts: a dropped connection costs one part, not the whole file. Recordings of past shows are in Storage too.
A rundown, not just a playlist
Line up as many as 200 items, each with its own In and Out marks, a label and a place in the order. Items follow each other without a gap or a reconnect.
Schedule it, or start it yourself
Choose Schedule it with a date and a start time, or I'll start it and press Go live now when you're ready. The time you pick is read in your browser's time zone.
Every destination, as usual
A pre-recorded broadcast is a stream like any other: the same platforms, the same on/off switch for each destination, the same merged chat column.
A control room while it airs
See what's on air and what comes next. Skip to the next item, Jump to any item, or Stop broadcast. Everything that aired, was skipped or was jumped over lands in the as-run log.
Played in real time
The video goes out at its natural pace, not as fast as the connection allows. Platforms receive it the way they receive any live encoder, and the timing on screen is the timing you recorded.
Broadcast it live, or upload it as a normal video?
Both put the same file in front of people. They behave very differently.
| StreamRove | Uploading it as a normal video | |
|---|---|---|
| Viewers watch together, at a set time | ✓ Yes | Each person whenever they find it |
| Live chat while it plays | ✓ On every platform it goes to | Comments, whenever people arrive |
| Several platforms at once | ✓ One broadcast reaches all of them | Upload to each platform separately |
| Several videos as one programme | ✓ A rundown of up to 200 items | A playlist the viewer clicks through |
| Changing course while it runs | ✓ Skip, Jump or Stop from the control room | Edit or take it down afterwards |
| Stays on the platform afterwards | Up to each platform's own live archive | ✓ Yes, until you remove it |
How to broadcast a recording as a live stream
Export the video first. An MP4 with H.264 video and AAC audio, at 1080p or below, is the safest choice; the video converter makes one in your browser.
Create a pre-recorded stream
Click New Stream and choose Pre-recorded livestream. Pick Single video file, or List of multiple video files for a playlist.
Upload or choose your videos
Press Upload Video for a new file up to 2 GB, or select one you uploaded before. Recordings of past shows can join the rundown on the broadcast page, through Add videos.
Name it and choose when
Give the broadcast a title, then choose I'll start it, or Schedule it with a date and a start time. Set After the last item (Stop or Loop) and Output: Same as first video, 720p or 1080p.
Pick the destinations
Switch on the channels this broadcast should reach, or press Add Channel to connect a new one. Nothing is switched on unless you choose it. Press Create Event to finish.
Fine-tune the rundown
On the broadcast page, the rundown lets you set In and Out marks, reorder and label items, or pick Filler: a video that repeats after the last item until you stop. Press Save rundown when you're done.
Go live, or let the clock do it
At the scheduled time it starts by itself; otherwise press Go live now. The source preview plays in step with what's going out, and viewers can watch in about 15 seconds.
Steer it while it airs
Use Skip for the next item, Jump for any item and Stop broadcast to end it. A jump costs a second or two of reconnect. Afterwards, the as-run log shows what aired and when.
How your video goes out
The Output you choose decides whether StreamRove sends your file as it is or re-encodes it. These are the values the play-out uses.
| Output | Picture | Video | Audio |
|---|---|---|---|
| Same as first video, one whole file | The file as it is | Sent unchanged, at the file's own bitrate | Unchanged |
| Same as first video, anything else | The first video's size, at most 1080 lines; its frame rate rounded to 24, 25, 30 or 60 | H.264: 5,000 kbps at 1080 lines, 3,000 at 720, 1,500 below; one and a half times that at 60 fps | AAC, 160 kbps, 44.1 kHz, stereo |
| 720p | 1280 × 720 at 30 fps | H.264, 3,000 kbps | AAC, 160 kbps, 44.1 kHz, stereo |
| 1080p | 1920 × 1080 at 30 fps | H.264, 5,000 kbps | AAC, 160 kbps, 44.1 kHz, stereo |
A file is sent unchanged only when the rundown is that one file, not trimmed at the start, with Output on Same as first video, no Filler and no logo. Re-encoded video always has a keyframe every 2 seconds, and a picture of a different shape gets black bars rather than being stretched.
Tips from people who run pre-recorded shows
They export for the strictest platform
When StreamRove sends a file unchanged, every platform receives the bitrate it was exported at. A video exported above 6,000 kbps is more than Twitch accepts. Either export near the strictest platform's rate, or set Output to 1080p: that re-encodes at 5,000 kbps and 30 fps, inside what YouTube, Twitch, Kick, Facebook and LinkedIn accept.
They end on a filler, not on black
Stop ends the broadcast the moment the last item finishes. If you'd rather close on your own terms, pick Filler in the rundown: a short video, a slide or a thank-you card repeats until you press Stop broadcast or jump back into the rundown. That leaves time to answer the last questions in chat while viewers still see something on screen.
They check the platform's rules first
To a platform, a pre-recorded broadcast arrives like any live stream, but platform rules about recorded content differ. Kick's guidelines for verification and its Partner Program ask streamers to avoid pre-recorded content. If a platform's programme matters to your channel, read its rules before you schedule, and say plainly in the title that it's a premiere.
They rehearse the rundown
A few days before, create the broadcast with every destination switched off and press Go live now. The source preview and the live output on the page show what platforms would get, and the as-run log confirms each item played. A rehearsal counts toward your plan's allowance of pre-recorded broadcasts. Keep it short and stop it once you've seen enough.
Frequently asked questions
Will platforms treat it as a real live stream?
Yes. StreamRove sends it to each platform's live ingest in real time, the way an encoder does. It arrives as a live broadcast, with that platform's live chat.
Do I have to pick a start time?
No. I'll start it is the default: the broadcast waits on its page until you press Go live now. Choose Schedule it when you want it to start on its own.
Which files can I use?
MP4, MOV, AVI, MKV, WMV or M4V, up to 2 GB each, uploaded in parts so a wobble on your connection doesn't restart the upload. Recordings already in Storage work too. Your plan sets how much Storage you have (pricing).
How many videos can one broadcast play?
Up to 200 items in one rundown, each trimmed with its own In and Out marks. After the last one, the broadcast stops, loops from the top, or holds on a filler video until you stop it.
Can it run as a round-the-clock channel?
Loop plays the rundown again from the top until you stop it. Your plan still sets how long one broadcast may run and how many output hours you have each billing period; both are on the pricing page.
Can I stop or change it once it has started?
Stop broadcast ends it cleanly at any point, and Skip and Jump move through the rundown while it airs. The rundown itself is locked on air; edit it after you stop, then press Broadcast again.
Can I be in the chat while it plays?
That's the best part. The stream page shows YouTube, Twitch and Kick chat in one read-only column, and you reply on each platform.
Is the broadcast recorded?
StreamRove doesn't make a separate recording of a pre-recorded broadcast, and you seldom need one: the source videos stay in Storage. Each platform keeps its own copy according to its own rules; YouTube, for example, may not archive streams longer than 12 hours.
Can I schedule a live show with a camera the same way?
No. Only pre-recorded broadcasts can be scheduled. For a live show, start your encoder or the Studio when it's time; until then, the share page simply says the stream hasn't started.
What if a video is missing or stops playing?
A file deleted from Storage shows as Missing in the rundown; on air it's skipped and logged as missing in the as-run log. If playback falls over mid-broadcast, it resumes where it stopped, a few times, before the page reports the broadcast as failed and says why.
Keep reading
From the blog
Put your next premiere on a timer
Upload the video, pick the platforms and the time, and spend the show in the chat.
Sign up for free