Skip to content
Guide · OBS Studio

OBS multistream to every platform from one output

OBS Studio streams to one service at a time. Point it at StreamRove and that one stream reaches YouTube, Twitch, Kick, Facebook and any RTMP destination together, while OBS encodes and uploads it only once. Below you'll find the exact OBS settings, a setup in eight steps and the free StreamRove dock for OBS.

No multi-output plugin, no second encode and no doubled upload. The free dock can even fill in the server and key.

1
Stream out of OBS
8.8 Mbps
Upload for 6,000 kbps
2
Keyframe Interval to set
31.1
OBS version for the dock

Why multistream from OBS through the cloud

One upload, however many platforms

OBS sends one stream to StreamRove and the copies for each platform are made on our side. Three platforms at 6,000 kbps need about 8.8 Mbps of upload this way, against about 26 Mbps when OBS sends three streams itself.

OBS encodes once

A multi-output plugin that gives each platform its own encoder settings runs one encode per output, on the processor or graphics card your game needs. Through StreamRove, OBS keeps a single encoder.

Change platforms without touching OBS

Each destination has a switch on the stream page that works while you're live, from any browser. One platform refusing the stream doesn't stop the others.

One set of numbers for your mix

The Output profile card on your stream page works out the bitrate, frame rate and audio bitrate that suit every destination you added, and names the platform behind each limit. It's advice: you type the values into OBS.

What OBS streamers get with StreamRove

A custom server OBS already knows

OBS's Custom... service takes StreamRove's RTMPS address, rtmps://live.streamrove.com:1936/live, with your stream key. Plain RTMP on port 1935 is there too.

SRT for shaky connections

OBS 25 and newer can send SRT. Paste the URL from your stream's SRT tab into Server, leave Stream Key empty, and the relay passes the stream to every platform as usual.

A second pair of eyes on OBS

The Broadcast Engineer panel gives your stream a 0–100 health score, and Stream Doctor explains problems in plain words, such as a keyframe interval above 4 seconds. Its checks are rule-based, not AI.

A holding screen if OBS drops

On the Control plan and up, the Backup stream card puts a holding screen, a countdown or a looping video on every platform when OBS stops sending, until you're back. It holds your one feed; it isn't a second one.

YouTube and Twitch chat in one column

Messages from both arrive together in a read-only column on your stream page. OBS stays full screen on your game while you read chat in a browser.

Save recording, then cut clips

On paid plans, press Save recording and the whole broadcast lands in Storage as an MP4, even if you press it mid-stream. Cut vertical clips from it in Clips.

One stream through StreamRove, or one output per platform in OBS?

OBS can reach several platforms with a multi-output plugin. Both routes work; they differ in what your PC and your line carry.

StreamRoveOBS sending to each platform itself
Upload for three platforms at 6,000 kbps✓ About 8.8 Mbps: one streamAbout 26 Mbps: three streams
Encoding work on your PC✓ One encodeOne per output that has its own encoder settings
A different bitrate per platform— No: one stream, one bitrate✓ Yes, each output has its own
Adding or dropping a platform while live✓ A switch on the stream page, from any browserStart or stop that output in OBS
Stream keys✓ Read automatically for YouTube, Twitch and Kick; stored encryptedPasted into each output
If OBS or your internet dropsHolding screen on Control and up; Signal alerts on every planEvery platform goes offline
Twitch Enhanced Broadcasting— Not through StreamRove✓ With Twitch as OBS's own service

How to multistream from OBS in eight steps

You do this once. After that, going live is the Start Streaming button.

  1. Create a stream in StreamRove

    Click New Stream, choose Encoder | RTMP and give it a name. The stream page opens on the RTMPS tab, with a URL and your stream key.

  2. Add your platforms

    Under Your Channels, connect YouTube, Twitch and Kick in one click. Facebook and LinkedIn take a pasted server and key; Custom RTMP covers the rest. Leave the switches off for now.

  3. Point OBS at StreamRove

    In OBS, open Settings → Stream, set Service to Custom..., paste the RTMPS URL into Server and your StreamRove key into Stream Key, then press Apply. With the StreamRove dock installed, Use this stream in OBS does the same.

  4. Set the encoder

    In Settings → Output, set Output Mode to Advanced. On the Streaming tab, pick an H.264 Video Encoder, then Rate Control CBR, the Bitrate from your Output profile card and Keyframe Interval 2.

  5. Set picture and sound

    In Settings → Video, set Output (Scaled) Resolution to 1920x1080 and FPS to 30 or 60. In Settings → Audio, choose 48 kHz and Stereo; on the Output → Audio tab, set Audio Bitrate to 128.

  6. Test with the destinations off

    Press Start Streaming and watch the preview on your stream page; it appears about 10 seconds after OBS connects. Check the sound, the health score and the Output profile card.

  7. Switch your platforms on

    Turn each destination on. It should change to Reaching. One that shows Not reaching needs its key or settings checked, and the others carry on while you fix it.

  8. Arm the safety nets

    Switch Signal alerts on for the stream, since they start off. On paid plans press Save recording, and on the Control plan and up choose what the Backup stream card should show.

OBS settings for one stream to several platforms

Labels as OBS shows them. The bitrate row depends on your destinations, because one stream goes to all of them.

ServiceSettings → StreamCustom...StreamRove isn't in OBS's list; Custom... takes any server.
ServerSettings → Streamrtmps://live.streamrove.com:1936/liveRTMPS, encrypted on port 1936. RTMP on port 1935 is the fallback.
Stream KeySettings → StreamYour StreamRove stream keyFrom the stream page. Platform keys go into StreamRove, not OBS.
Output ModeSettings → OutputAdvancedSimple mode has no Keyframe Interval box.
Video EncoderOutput → Streamingx264, NVIDIA NVENC H.264, AMD HW H.264 (AVC) or Apple VT H264 Hardware EncoderEvery platform takes H.264, and Kick refuses H.265. The relay can convert H.265, but H.264 goes out untouched.
Rate ControlEncoder settingsCBRA constant bitrate, as Twitch and Kick ask.
BitrateEncoder settings6,000 kbps with Twitch or Facebook, up to 8,000 for Kick aloneThe strictest destination decides; the Output profile card names it.
Keyframe IntervalEncoder settings20 (auto) means 8 seconds on a custom server; StreamRove warns above 4.
Output (Scaled) ResolutionSettings → Video1920x1080StreamRove plans every platform at 1080p at most.
FPSSettings → Video60, or 30 with LinkedInLinkedIn takes 30 fps at most, so StreamRove plans it at 30.
AudioSettings → Audio; Output → Audio48 kHz, Stereo, Audio Bitrate 128128 kbps suits every destination; 160 only for Twitch and Kick alone.

With the StreamRove dock, Use this stream in OBS fills in the first three rows for you. Check your line first with the bitrate calculator.

What experienced OBS streamers check

Never leave Keyframe Interval on 0

OBS's 0 means automatic, which on a custom server works out to a keyframe every 8 seconds. Platforms ask for 2, previews take longer to appear, and StreamRove's health panel warns above 4. Set Keyframe Interval to 2 on the Streaming tab, and look at it again after you switch encoders: each encoder has its own settings box.

Watch dropped frames, not just the bitrate

OBS's Stats dock shows Dropped Frames (Network): frames that never left your computer because the upload couldn't keep up. A count that keeps climbing means the bitrate is too high for your line right now: lower it, then watch again. Settings → Advanced → Network has Dynamically change bitrate to manage congestion, which lowers the bitrate instead of dropping frames; OBS supports it for RTMP only.

Keep a local recording too

StreamRove's Save recording keeps what your viewers received, waiting in Storage on paid plans. A recording in OBS is your full-quality copy if the line had a bad patch. On the Output → Recording tab, choosing (Use stream encoder) as the Video Encoder records without a second encode, which leaves your game its frames while both run.

Use the dock on shared PCs

On a borrowed or shared computer, the StreamRove dock is the tidier choice. It signs in with a code you approve in your browser, and the key it receives can only read your streams and their health and switch destinations on or off. Revoke that machine under Account settings → API keys when you're done, and nothing else you use is affected.

Frequently asked questions

Can I stream to multiple platforms with OBS?

Yes. On its own, OBS streams to one service, so there are two ways to reach more. A plugin such as obs-multi-rtmp or Aitum Multistream adds outputs, and each one is uploaded separately: three platforms take three times the upload. Or you send OBS's one stream to StreamRove with the Custom... service, and StreamRove passes it on to YouTube, Twitch, Kick, Facebook and any RTMP destination. That second way is what this page sets up.

Do I need a plugin to multistream from OBS?

No. OBS's built-in Custom... service is all it takes: paste one server address and one stream key, and StreamRove sends the stream to every platform you added. If you'd rather not copy anything, the free StreamRove dock for OBS signs in from OBS and fills both in for you.

What are the best OBS settings for multistreaming?

Output Mode Advanced, an H.264 encoder, Rate Control CBR, Keyframe Interval 2, 1920x1080 and AAC audio at 128 kbps. The bitrate follows your strictest destination: 6,000 kbps at 60 fps when Twitch or Facebook is on, 5,000 at 30 fps when LinkedIn is. The Output profile card shows the figure for your mix, and the bitrate calculator checks it against your upload.

Is there a StreamRove plugin for OBS?

Yes. StreamRove for OBS is a free, open-source (GPL) dock for Windows, macOS and Linux, for OBS 31.1 or newer. Sign in by approving a code in your browser, pick a stream and press Use this stream in OBS; the dock can also go live, switch destinations and show health. It's on github.com/StreamRove/obs-streamrove/releases, and Windows asks you to confirm its installer, which isn't code-signed yet.

Will multistreaming use more of my upload?

No. OBS uploads one stream to StreamRove whatever the number of platforms. At 6,000 kbps of video plus audio, that's about 8.8 Mbps of upload, by the bitrate calculator's rule of using no more than 70% of the line. Three outputs straight from OBS would need about 26 Mbps.

Can Twitch get 6,000 kbps while YouTube gets more?

Not from one stream. StreamRove sends the same stream everywhere and makes no version per platform: with Twitch on the list, 6,000 kbps is the figure, and YouTube accepts it. On a night when YouTube is your only destination, raise it: StreamRove plans YouTube at up to 12,000 kbps, the most StreamRove's live ingest is built for, and YouTube's own table goes higher still.

Does going through StreamRove add delay?

Your stream passes through one more server, and viewers may be slightly further behind than with a direct stream. The platforms' own delay is usually the bigger part; YouTube lets you choose Normal, Low or Ultra-low latency in its stream settings. We don't quote a fixed figure for the extra hop.

Can I send SRT from OBS instead of RTMP?

Yes, from OBS 25 on. In Settings → Stream choose Custom..., paste the URL from your stream's SRT tab into Server and leave Stream Key empty. OBS reads SRT latency in microseconds: add &latency=500000 to the URL for StreamRove's suggested 500 ms. Our SRT guide explains when SRT is worth it.

Can I keep OBS's Twitch or YouTube service instead of Custom...?

Not for multistreaming. OBS's built-in services send straight to that one platform, and the stream never reaches StreamRove. Choose Custom... with StreamRove's address, or let the dock set it. Twitch's Enhanced Broadcasting needs Twitch as OBS's service and isn't available through StreamRove.

What happens if OBS crashes mid-stream?

Your platforms stop receiving until OBS sends again. With Signal alerts on, you're told by email, in the app or on Telegram after a minute without signal. On the Control plan and up, the Backup stream card holds every platform on a holding screen meanwhile. Reopen OBS and press Start Streaming: the server and key haven't changed.

Keep reading

From the blog

Send OBS to every platform from one output

Paste one server and key into OBS, add your platforms, and press Start Streaming.

Sign up for free