Make public meetings open to everyone
Stream council meetings, town halls, and hearings with the accessibility, transparency, and reliability the public expects.
Transparent, accessible, on the record
Screen sharing as a scene
Share slides or a demo as its own layout, with the presenter kept in view.
A recording of every session
Switch recording on and the whole meeting is saved to Storage, dated, ready to download for the public record.
Multistream to public channels
Reach residents on YouTube, Facebook, and your own portal.
A holding slide if the feed drops
On the Control plan, residents see a 'we'll be right back' slide instead of a dead stream while the room reconnects, and staff are alerted within a minute.
A public page and an embed
Every broadcast gets a share page and an embeddable player for the municipal website.
Downloadable recordings
Export the full session file for the public record or a records request.
Streaming a council meeting, start to finish
Written for a clerk's office or a small IT team doing it themselves. The first meeting takes an afternoon to set up; after that it is the same routine every time.
Plug into the room's sound
Take a feed from the chamber's audio mixer, the one that drives the speakers, into the streaming computer through a USB audio interface. Every member's microphone then reaches the stream at the level the room hears. A laptop microphone at the back of the room is the most common reason meeting streams are hard to follow.
Place one or two cameras
One wide camera that shows the whole dais is enough to start. A second on the public podium helps when residents speak. Connect them to the computer with an HDMI-to-USB capture device and switch between them in OBS, or use the browser Studio for a single camera.
Create the stream and its destinations
In StreamRove, create a stream and add the channels residents already use: the council's YouTube channel in one click, its Facebook page with the server and key from Facebook, and the municipal website through the embeddable player.
Use calm, safe settings
Use the settings in the table below. A meeting does not need a high bitrate: 720p or 1080p at 30 frames per second with clear sound is easier to follow than a sharp picture with muddy audio.
Switch on the recording and the alerts
Turn recording on before the call to order, and switch signal alerts on so the clerk is emailed if the feed stops for more than a minute. If part of the meeting is closed to the public, stop the broadcast and start it again when the public session resumes.
Bring in remote speakers and an interpreter
Send a browser link to anyone presenting from outside the room, or to a sign-language interpreter. They choose their camera and microphone on the join screen, need no account, and appear beside the room camera when you bring them on.
Start on time with the agenda on screen
Go live ten minutes early with a slide showing the agenda and the start time, then switch to the room camera at the call to order.
Publish and keep the record
When the meeting ends, the recording is in Storage. Download it for the official archive: StreamRove keeps recordings for your plan's retention period and warns you three days before one is deleted. Post the replay link wherever the agenda was published.
A setup a clerk's office can run
Real values, chosen for a meeting rather than a show. They suit every platform a council usually streams to, Facebook included.
| Item | What to use | Why |
|---|---|---|
| Internet | A wired connection with at least 6 Mbps upload | Wi-Fi in a full chamber is shared with every phone in the room. |
| Picture | 1280 × 720 or 1920 × 1080, at 30 frames per second | Enough for faces and name plates, and 30 fps suits every platform a council streams to. |
| Video bitrate | 3,000 kbps at 720p, 4,000 kbps at 1080p | Plenty for a meeting, and inside what YouTube, Facebook and LinkedIn all take, so one stream suits every destination. |
| Keyframe interval | 2 seconds | What every platform expects. OBS's 'auto' means 8 seconds, which is too long. |
| Rate control | CBR (constant bitrate) | A steady stream the platforms can pass on without stalling. |
| Audio | AAC, 48 kHz, 128 kbps | Speech stays clear at this rate, and every destination accepts it. |
| Way in | RTMPS; SRT if the building's network drops data | SRT re-sends what was lost, and short drops never reach viewers. |
Making meetings easier to follow
Sound decides whether people stay
Residents will watch a fixed wide shot for two hours, but not a meeting where half the speakers are inaudible. Ask members to speak into their microphones, test each one before the session, and listen on headphones while it runs.
Captions help everyone, not only deaf viewers
StreamRove Studio can draw live captions into the picture from the host's microphone, in 15 spoken languages, with an optional translated line underneath (in Chrome or Edge). They are part of the video rather than a separate caption file; if your accessibility rules ask for a file as well, plan for it separately.
Make the archive easy to find
Give every stream the body's name and the date, such as 'City Council, 14 October 2026', and post the replay link next to that meeting's agenda and minutes. That is where people look for it months later.
Plan for the night something breaks
Keep a printed one-page checklist by the computer: how to restart the encoder, how to switch to the backup internet, who to call. With signal alerts on, the clerk finds out within a minute instead of from a resident's email the next morning.
Where residents can watch
Most councils use more than one. StreamRove sends the same meeting to all of them at once.
| Where | Who it reaches | What residents need | Worth knowing |
|---|---|---|---|
| YouTube channel | Anyone searching for the meeting later | Nothing; no account is needed to watch | YouTube keeps a replay on the channel |
| Facebook page | Residents who follow the city's page | Nothing to watch; an account to comment | Facebook ends a live video after 8 hours, so split very long sessions |
| Municipal website | People who go to the city's own site | Nothing; the player is part of your page | Paste the embed code once; on the free plan the player shows a small StreamRove mark |
| Share page link | Anyone you send the link to, by email or a notice | Nothing; it opens in any browser | Can be protected with a passcode on the Control plan |
Serving the public sector
City councils
Open, recorded meetings.
Agencies
Briefings and announcements.
Public hearings
Transparent, on the record.
Education boards
Reach every household.
Frequently asked questions
Can a public meeting be streamed to more than one place at once?
Yes. The council's YouTube channel, its Facebook page and the municipal website, through the embeddable player, can all receive the same broadcast simultaneously, which is usually what an access requirement actually asks for.
Is the meeting archived automatically?
Only when recording is on. Switch it on before the meeting (paid plans) and the whole session is saved to Storage as it streams. Recordings are kept for your plan's retention period, with a warning three days before one is deleted. Download the official copy for your own archive.
What if the room's internet is unreliable?
Use SRT rather than RTMP for the way in: it is built for lossy links and recovers from losses that would stall an RTMP session. The health panel shows losses and bitrate as they happen.
Can remote participants join the broadcast?
Yes. With the Studio's browser links, a remote speaker or a signer can appear in the stream without being in the room. Up to four people can be on screen at once.
Do residents need an account to watch?
No. YouTube, the share page and the player on your website all play in any browser without signing in. Only commenting on YouTube or Facebook needs an account.
Can we add captions?
In StreamRove Studio, live captions are drawn into the picture from the host's microphone in 15 languages, with an optional translated line underneath. They need Chrome or Edge on the host's computer. A separate caption file, such as VTT, is not available.
How long are recordings kept?
For your plan's retention period. Three days before a recording is deleted, the owner gets a warning. Records you are required to keep should be downloaded and stored in your own archive.
Can we keep a session private, like an internal training?
Yes. Send the share page link instead of streaming to public platforms, and on the Control plan protect it with a passcode, or ask viewers to leave their name and email before watching.
Keep reading
From the blog
Bring transparency to every meeting
Stream public sessions accessibly and keep the record available to everyone.
Sign up for free