Host webinars that reach everyone
Present your slides, bring speakers in from a browser link, and stream the session to LinkedIn, YouTube and your own website at the same time.
A webinar studio in your browser
Slides with you in view
Share a window or a whole screen and the Screen share layout keeps you inset beside it. Screen share goes out at 1080p30, picture only; play videos with sound as a media source.
Speakers from one link
Panelists open your invite link, test their camera and microphone on the join screen, and need no account. Up to four people fit on screen; your plan sets how many can join.
LinkedIn, YouTube and your site at once
YouTube connects in one click. LinkedIn, Facebook and any service with an RTMP address take a server and key, and your website gets the embeddable player.
Questions on screen
Audience comments stay on each platform, outside the Studio. Keep them open on a second screen, and put the question you are answering on air with the Q&A overlay.
Your own page, with a door if you need one
Every webinar gets a share page and an embed. On the Control plan, the link can ask for a passcode, or for a name and email address, before the player opens.
Replays and clips
With recording on (paid plans), the session is in Storage when you finish. Schedule it to run again for another time zone, or pick it in Clips for short follow-ups.
Running a webinar from the browser, step by step
Start the week before. On the day the Studio does most of the work; what makes a webinar feel professional is the preparation.
Create the event on each platform
Decide where people will watch. YouTube connects in one click. For LinkedIn, create the live event on your profile or page and copy its stream URL and key into StreamRove; LinkedIn gives every event a new key, which makes this a step for each webinar. For your website, copy the Embed code from the stream's Share window.
Make the slides readable on a phone
Keep the deck at 16:9, with large type and few words per slide: many viewers watch on a phone. Share the window your slides are in rather than the whole desktop, and switch on Do Not Disturb so no message pops up on air.
Build one scene for each part
In the Studio, add an intro card with a countdown that plays when you press Go Live, a Solo scene for your welcome, the Screen share layout for slides, Side by side or News for the panel, and an outro card for the last words. An Interval card covers a break with its own countdown and returns to the scene it left.
Send speaker links the day before
Press Invite guests and send the link with the start time. Ask speakers to join early, wear headphones and close Zoom or Teams: an app holding the camera keeps it from the Studio, and the join screen says so. Guests can share their own screen if they bring a demo.
Put names and the next step on screen
Each speaker's name comes from the join screen; add their job under Role / subtitle and choose one of five title positions. Use the banner for the link you want people to visit, and drag it where it covers no faces.
Rehearse with a private test
Switch every destination off and press Start a private test. For up to five minutes the broadcast goes to StreamRove only and plays back on the stage, a little behind. Click through every scene once, intro to outro, with each speaker in place.
Go live and run the questions
Switch the destinations on and press Go Live. The Welcome overlay greets people for eight seconds; the Q&A overlay stays in the top right with the question you type. A teammate reading the LinkedIn, YouTube and Facebook comments can pass you the best ones, and Be right back mutes your mic while you sort something out.
Send the replay the same day
With recording on, the session reaches Storage → Recordings a few minutes after you end. Share its link, cut the strongest answers in Clips, or schedule the recording in Upload & stream to run again for another time zone.
Webinar settings worth knowing
Real values from the Studio: what your audience receives, and what to plan the session around.
| What | Value | What it means for you |
|---|---|---|
| Studio output | 1920 × 1080 at 30 fps, H.264 up to 6,000 kbps, AAC 128 kbps | Within the limit StreamRove uses for LinkedIn, 6,000 kbps at 30 fps, with nothing to set yourself |
| Screen share | 1080p at 30 fps, picture only | The computer's sound is not sent; play videos with sound as a media source |
| Speakers on screen | Up to 4, host included | A larger panel takes turns; your plan sets how many can join |
| Intro and outro cards | 3 to 60 seconds, optional countdown | The intro plays at Go Live; the outro plays as you end, then the broadcast stops everywhere |
| Break card | Up to 60 minutes, with a countdown | When the time runs out, the show returns to the scene it left |
| Instant overlays | Welcome (8 seconds), Q&A (stays on), Be right back (mutes your mic) | One tap on, one tap off, drawn into the broadcast |
| Private test | Up to 5 minutes, StreamRove only | Every destination has to be switched off while it runs |
| Live captions | Host's microphone, 15 spoken languages, Chrome or Edge | Drawn into the picture; guests are not captioned and there is no caption file |
Want viewers to leave their details first? On the Control plan, the share link can ask for a name and email address before the player opens.
How to keep people watching until the Q&A
Promise something in the first minute
Viewers decide quickly whether to stay. Skip the housekeeping and say what they will be able to do by the end. Put the agenda on a single slide after that, and keep each speaker's introduction to one sentence: their lower third already shows the name and the role, and the time is better spent on the subject people came for.
Change the picture every few minutes
A slide that stays up for ten minutes looks like a frozen stream on a phone. Cut between the Screen share layout and Side by side as you move from showing to talking, and bring a panelist in for a second opinion. Each change is one click in the Studio, as a straight cut or a dissolve that takes a quarter of a second.
Ask the first question yourself
Questions arrive slowly at first, because nobody wants to go first. Have a colleague post an easy one early, or open with the question customers ask you most often. Put it on screen with the Q&A overlay while you answer, and replay viewers will know what was asked without hearing it read out twice.
Plan for the people who watch later
For many webinars the replay ends up with more viewers than the live session. Keep recording on, say at the start that a replay is coming, and send the link the same day. A second live run from the recording, at a friendlier hour for another time zone, reaches people the first one missed, while you answer comments on each platform.
Three ways to present a webinar
All three reach the same platforms. They differ in who can speak, where the questions arrive and how much you can prepare.
| Browser Studio | OBS or another encoder | A recorded session, played as live | |
|---|---|---|---|
| Best when | Speakers are in different places | You already run scenes in OBS or vMix | The talk is finished and only the Q&A needs to be live |
| Speakers | Join from a link, up to four on screen | Whoever your own setup brings in | Nobody live on screen; the video plays in real time |
| Audience questions | On each platform; not shown inside the Studio | YouTube, Twitch and Kick in one column on the stream page; the rest on each platform | The same chat column on the broadcast page |
| Recording | Record armed before Go Live (paid plans) | Save recording at any point (paid plans) | The video already exists |
| How it starts | You press Go Live | You start streaming from the encoder | At the scheduled minute, or with Go live now |
Webinars for every team
Training & education
Teach at any scale.
Marketing
Generate and nurture leads.
Customer success
Onboard and upskill users.
Communities
Host AMAs and meetups.
Frequently asked questions
Is StreamRove a webinar platform or a streaming platform?
A streaming platform. Your audience watches on LinkedIn, YouTube, Facebook or your own site, without registering or installing anything. If you need a door, the share link can ask for a passcode, or for a name and email address, on the Control plan. There are no invitations or reminder emails.
How do guest speakers join?
From a link in their browser. They test their camera and microphone on the join screen, type their name and come in; no account and no download. They can share their own screen too, which helps when a panelist brings a demo.
Can we share slides?
Yes. Share the window your slides are in, whether PowerPoint, Keynote or Google Slides, and choose the Screen share layout: the slides fill the frame with you inset. Screen share carries the picture only, not the computer's sound.
How many speakers can be on screen?
Up to four at once, host included, and that limit is the same on every plan. Your plan sets how many guests can join the Studio. For a bigger panel, speakers can take turns: one leaves, and the next joins from the same link.
Can I see the audience's questions inside the Studio?
No. Comments stay on each platform and are not shown in the Studio; the Studio's own chat is for you and your speakers. Keep LinkedIn, YouTube and Facebook open on a second screen, or hand them to a teammate. When you present from an encoder or play a recording instead, the stream page shows YouTube, Twitch and Kick chat in one read-only column.
Can we stream a webinar to LinkedIn?
Yes, as a custom destination. LinkedIn Live has to be available on the profile or page you stream from. Create the event in LinkedIn, copy its stream URL and key into StreamRove, and repeat for the next webinar: LinkedIn gives each event its own key.
Can viewers register before they watch?
Not in the webinar-platform sense. On the Control plan, a share link can ask each viewer for a name and email address before the player opens, or for a passcode you send them, and the share panel counts how many people have been let in. YouTube and LinkedIn stay open to anyone.
Can we add captions?
Yes. Show live captions draws the host's words into the picture from the host's microphone, in 15 spoken languages, with an optional translated line. It needs Chrome or Edge; guests are not captioned, and no caption file is produced.
Can we run the same webinar again later?
Yes. With recording on, the session lands in Storage. Add it to a rundown in Upload & stream, pick a start time, and it goes out as a live broadcast while you answer comments on each platform.
Do we get attendance numbers?
For your own share page and embedded player, StreamRove shows views and peak viewers per broadcast. Each platform counts its own audience in its own analytics; StreamRove does not add them up across platforms.
Keep reading
From the blog
Run your next webinar from the browser
Invite your speakers with a link and reach LinkedIn, YouTube and your own site at once. Free to start.
Sign up for free