Skip to content
Product · Multistreaming

One broadcast, every platform at once

Send one stream from OBS, vMix, a hardware encoder or the browser Studio, and StreamRove passes it on to YouTube, Twitch, Kick, Facebook, LinkedIn and any service with an RTMP or SRT address, all at the same time. Your connection carries one stream, however many platforms are watching.

Each platform gets its own switch, its own status and its own alert. Turn one on or off in the middle of a show and the others never notice.

YOUR STREAMLIVEExcellent1080p60StreamRoveYouTubeLIVEfFacebookLIVETwitchLIVEinLinkedInLIVETikTokLIVECustom RTMPLIVE

Multistream to YouTube, Twitch, Kick, Facebook and more

One stream from you reaches YouTube, Twitch, Kick, Facebook, LinkedIn, TikTok, X, Instagram and any other service that gives you an RTMP address. YouTube, Twitch and Kick connect in one click; for the others you paste the server and stream key the platform gives you.

  • YouTubeYouTube
  • TwitchTwitch
  • TikTokTikTok
  • XX
  • RumbleRumble
  • YouNowYouNow
  • BambuserBambuser
  • OK.ruOK.ru
  • ViewStubViewStub
  • Picarto.TVPicarto.TV
  • DailymotionDailymotion
  • SOOPSOOP
  • KickKick
  • LinkedInLinkedIn
  • VimeoVimeo
  • Brightcove
    Brightcove
  • Hopin
    Hopin
  • FacebookFacebook
  • HuyaHuya
  • DouyuDouyu
  • BilibiliBilibili
  • Nimo TVNimo TV
  • SteamSteam
  • Naver TVNaver TV
  • TelegramTelegram
  • Amazon LiveAmazon Live
  • InstagramInstagram
  • Custom RTMPCustom RTMP
  • Custom SRTCustom SRT
1
Stream from your computer
8.8 Mbps
Upload for 1080p60, any number of platforms
4
Ways in: RTMPS, RTMP, SRT, WHIP
60 s
Until a Signal alert reaches you

Why send it once

Your upload stops being the limit

Going live on four platforms straight from your computer means four copies leave your connection. Through StreamRove, one does. At 1080p60 and 6,000 kbps that's about 8.8 Mbps of upload instead of 35, often the difference between a line that copes and one that drops frames.

Your computer encodes once

Every extra output in a desktop encoder is more work competing with your game or your slides. Here the copies are made on our side, and a fifth platform adds nothing to what your computer has to do.

Every platform has its own switch

Destinations are independent. Add one or switch one off while you're live, and the rest keep receiving. A platform that refuses your key only takes itself offline.

You hear about problems first

A health score from 0 to 100 watches what your encoder sends, and Stream Doctor explains any problem in plain words. With Signal alerts on, you're told when the signal has been gone for a minute, or when a single platform stops receiving.

What you get

One click for YouTube, Twitch and Kick

Press Connect, approve on the platform, and StreamRove reads your stream key itself. The connection is reused by every stream you create: nothing to copy before each show.

Any address that takes a stream

Facebook, LinkedIn, X, Instagram and TikTok take the server URL and stream key the platform gives you. Custom RTMP and Custom SRT cover services we don't list, with a username and password where a server asks for one.

Your encoder, your way in

Send over RTMPS (the default), RTMP or SRT from OBS, vMix or hardware, or try WHIP from a browser. No encoder at all? Build the show in the Studio, or play a finished video with Upload & stream.

Settings that suit the whole mix

The Output profile card on your stream page lists encoder settings that every attached platform accepts, and names the one behind each limit, such as Limited by Twitch. You type them into your encoder once.

Keep the show when you want it

On paid plans, press Save recording, even halfway through, and the whole broadcast lands in Storage as an MP4 to download, share or cut into clips. Recording stays off until you press it.

Chat from several platforms, one column

Messages from YouTube, Twitch and Kick arrive together in one read-only column on the stream page, each name in its platform's colour. You reply on each platform.

One stream through StreamRove, or OBS sending to each platform?

OBS can push to several platforms by itself with a multi-output plugin. Both routes work. They differ in what your connection carries and in what you can still change once you're live.

StreamRoveOBS sending to each platform itself
Upload for four platforms at 1080p60, 6,000 kbps✓ About 8.8 Mbps: one streamAbout 35 Mbps: four streams
A different bitrate for each platform— No: every platform gets the same stream✓ Yes, each output has its own
Adding or dropping a platform mid-show✓ A switch on the stream page, from any browserStart or stop that output on the streaming computer
Seeing which platform is receiving✓ Reaching, Connecting… or Not reaching for each, plus alertsEach output's status inside OBS
If your internet dropsHolding screen on Control and up; Signal alerts on every planEvery output stops
Streaming from vMix, hardware or a browser✓ Any RTMP, RTMPS or SRT encoder, or the Studio— OBS only
Keeping a copy of the showSave recording on paid plans, kept online✓ OBS's own recording, on your disk

How to multistream with StreamRove

You set this up once. After that, going live is the Start Streaming button in your encoder.

  1. Connect your platforms

    Open Channels. Press Connect YouTube, Connect Twitch or Connect Kick and approve on the platform. For Facebook, LinkedIn, X, Instagram or TikTok, open the platform's card and paste the server URL and stream key it gives you. The stream key finder shows where each one keeps them.

  2. Create a stream

    Click New Stream and choose Encoder | RTMP. Choose StreamRove Studio instead to produce the show in your browser, or Pre-recorded livestream to play a video.

  3. Add the platforms to this stream

    Under Your Channels, add each platform you want for this show. Each gets its own switch; keep them off for now. Your plan sets how many destinations a stream can hold, and switched-off ones count too.

  4. Put the address into your encoder

    The stream page opens on the RTMPS tab: rtmps://live.streamrove.com:1936/live and a separate stream key. In OBS, open Settings → Stream, choose Custom... as the Service and paste both. On a shaky line, use the SRT tab instead; SRT streaming explains when it helps.

  5. Type in the Output profile values

    Copy what the Output profile card shows into your encoder: bitrate, frame rate, H.264, CBR and a keyframe every 2 seconds. The table below lists those values for the most common mixes.

  6. Test with every switch off

    Start streaming with all destinations switched off and watch the preview on the stream page. Nothing reaches the platforms yet. Check the picture, the sound and the health score in peace.

  7. Switch the platforms on

    Flip each destination on. Every one should move from Connecting… to Reaching. One that stays on Not reaching usually has a reset key or a setting outside that platform's limits; the others carry on while you fix it.

  8. Turn on Signal alerts

    Signal alerts are off until you switch them on for the stream. Once on, they reach you by email, in the app, on Telegram or through a webhook when the signal drops for a minute or one platform stops receiving.

Encoder settings for common platform mixes

The values the Output profile card shows for each mix: the strictest platform sets each number. Every row is 1920 × 1080, H.264, CBR, with a keyframe every 2 seconds. The upload column uses the bitrate calculator's rule of keeping the stream under 70% of your upload.

YouTube only9,000 kbps (up to 12,000)60 fpsAAC 128 kbps13 Mbps
YouTube + Twitch6,000 kbps, set by Twitch60 fpsAAC 128 kbps8.8 Mbps
Twitch + Kick6,000 kbps, set by Twitch60 fpsAAC 160 kbps8.8 Mbps
YouTube + Kick8,000 kbps, set by Kick60 fpsAAC 128 kbps11.6 Mbps
YouTube + LinkedIn5,000 kbps (up to 6,000)30 fps, set by LinkedInAAC 128 kbps7.3 Mbps
YouTube + Facebook6,000 kbps, set by Facebook (up to 9,000)60 fpsAAC 128 kbps8.8 Mbps
Custom RTMP or SRT only6,000 kbps (up to 8,000)60 fpsAAC 160 kbps8.8 Mbps

Measure your own line with the bitrate calculator and its Measure my upload button. The calculator starts from a more cautious ladder (6,000 kbps for 1080p60) and lowers it until it fits your upload.

What experienced multistreamers do

They remove platforms they won't use today

Every destination attached to a stream counts toward your plan's limit and shapes the Output profile, even with its switch off. A LinkedIn destination left on the list keeps the card at 5,000 kbps and 30 fps for a show that only goes to YouTube and Twitch. Remove it and the card goes back to 6,000 kbps at 60 fps. Adding it back later takes one click.

They know where the Facebook numbers come from

The 6,000 kbps the card shows once Facebook joins is what StreamRove plans for Facebook, chosen because it sits inside both of Meta's published ranges: 3,000 to 6,000 kbps for 1080p at 30 fps, and 4,500 to 9,000 at 60 fps. The card's maximum, 9,000, is the top of the 60 fps range. With YouTube, Twitch and Facebook on one stream, 6,000 kbps at 60 fps suits all three; Twitch sets that ceiling either way.

They test with nobody watching

Start the encoder with every destination off and look at the preview on the stream page. A wrong scene or a muted microphone costs nothing at this point. The health checks already run: a keyframe interval over 4 seconds, a bitrate under 2,000 kbps or a silent audio track shows up here, long before a viewer could notice it.

They plan for the line dropping

Home internet fails now and then. Signal alerts tell you within a minute, by email, in the app, on Telegram or through one webhook to Slack, Discord, Teams or Google Chat. On the Control plan and up, the Backup stream card goes further: while your encoder is gone, every platform gets a holding screen with your message or a countdown until it's back. It holds your one stream; it isn't a second one.

Frequently asked questions

How many platforms can I stream to at once?

As many as your plan's destination limit; the number for each plan is on the pricing page. The limit counts every destination attached to the stream, switched on or off. If you hit it, remove a destination you won't use today rather than just switching it off.

Does every extra platform need more upload speed?

No. Your encoder sends one stream to StreamRove and the copies are made on our side. At 1080p60 and 6,000 kbps you need about 8.8 Mbps of upload, whether the stream goes to two platforms or five. The bitrate calculator checks your line.

Does StreamRove change my picture?

Normally not. Standard delivery passes your encoder's stream on to every platform as it arrives, at the bitrate and size you chose. It's re-encoded only when something is drawn on it: the free plan's StreamRove mark or your own logo (Guardian plan). Studio shows are always put together on our side. On the standard path, interlaced 1080i50 arrives as 25p; Broadcast delivery (Relay plan and up) keeps it as it is for a destination you choose.

Can I stream to Facebook, LinkedIn, X or Instagram?

Yes, by pasting the server URL and stream key each platform gives you. One-click connect for Facebook and LinkedIn is waiting for the platforms' approval; X gives apps no way to start a stream. Add LinkedIn and Instagram on the day: LinkedIn issues a new key for every event, Instagram for every broadcast. X needs an X Premium subscription and gives you the address in Live Studio.

Can I add a platform you don't list?

Yes, if it gives you an RTMP, RTMPS or SRT address. Add it in Channels as Custom RTMP or Custom SRT. Custom RTMP also takes a username and password for servers that ask for one.

What happens if one platform refuses the stream?

Only that destination stops: it shows Not reaching on the stream page and the rest keep going. Common causes are a reset or expired key, a platform that wants the broadcast set up on its side first, and settings outside its limits. With Signal alerts on, you're told when a single destination stops receiving.

Can each platform get a different bitrate or resolution?

No. Every platform receives the same stream; StreamRove doesn't make a separate version for each one. Choose settings the strictest platform accepts. The Output profile card on your stream page shows them and names the platform behind each limit.

Can I send over SRT or WHIP instead of RTMP?

Yes. SRT, to live.streamrove.com:8890 in caller mode, copes better with a line that loses data; SRT streaming has the settings. WHIP lets a browser or a WHIP-capable encoder send over WebRTC, and StreamRove relays it to your destinations like any other stream. Direct WHIP sessions aren't recorded.

Can I set a different title on each platform?

Not from StreamRove. Write each title where the platform keeps it: YouTube Studio for YouTube, the Creator Dashboard for Twitch. Live Control on the stream page sends one set of values to the platforms that accept them and can change Twitch's title and category mid-show. The YouTube connection only reads.

Do Twitch and Kick allow multistreaming?

Yes, with rules. Twitch's terms allow it when Twitch viewers get an experience at least as good as elsewhere, you don't send them off Twitch, and no merged chat from other platforms appears on the Twitch stream. Kick partners switch on Multistreaming while another long-form platform is live, and Kick pays them half for that time. The YouTube + Twitch guide and the Kick guide go into detail.

Keep reading

From the blog

Send one stream to every platform

Connect your platforms once, point your encoder at one address, and go live everywhere from the same button.

Sign up for free