Skip to content
Use Case · Concerts & Events

Live stream your concert or event to fans everywhere

Bring the show to fans who could not be in the room: your cameras, the sound from the desk, and one stream that reaches every platform at once.

LIVESRT
CAM 1
CAM 2
CAM 3
Status On air
Passthrough
Multi-camera feed
Custom
RTMP platforms
SRT
Venue-grade ingest
Archived
Full recording

Production-grade live events

Your cameras, your mixer

Cut between angles in OBS, vMix or a hardware switcher and send one finished feed. It reaches every platform as it left your desk.

The desk's sound, in stereo

Send the mixing desk's stereo mix with the picture and fans at home hear the show the way the engineer mixed it.

Your own page, not just theirs

A share page and an embeddable player put the show on your site next to the platforms.

Every platform at once

YouTube, Facebook, Twitch, Kick, TikTok and any service with an RTMP address get the same stream at the same moment.

Live chat beside the show

Read YouTube, Twitch and Kick chat in one column on the stream page while the set runs.

Highlight clips

Turn the best songs into vertical clips straight from the recording, ready to promote the next date.

From the venue to every platform, step by step

This is the order a crew that streams shows every week follows. Start a few days before the gig, not on the night.

  1. Test the venue's internet in advance

    Ask for a wired connection kept for the stream, then run the upload test in the bitrate calculator from that cable. Plan on about 9 Mbps up for a 6,000 kbps stream, or 6.6 Mbps for 4,500 kbps at 1080p30. If the result jumps around, use SRT and bring a 4G/5G router as a spare line.

  2. Take the sound from the desk

    Ask the sound engineer for a stereo feed from the mixing desk into your capture card or audio interface. A microphone in the hall hears the crowd and the echo; the desk feed sounds like the record. Blend one audience mic in quietly if you want the room.

  3. Mix your cameras on site

    Switch between cameras in OBS, vMix or a hardware switcher, and send StreamRove the finished programme. Whatever happens on stage, one finished stream leaves the building.

  4. Create the stream and choose how it reaches us

    In StreamRove, create a stream and open its connection details. RTMPS is the default and suits a solid wired line. On anything shakier, pick the SRT tab and set the latency in your encoder to 500 ms. Copy the address and key exactly as shown.

  5. Add every platform

    Connect YouTube, Twitch or Kick in one click. For Facebook, Instagram, TikTok, X or LinkedIn, paste the server and key from that platform; the stream key finder shows where each one keeps them. Any service that gives you an RTMP address works as a custom destination.

  6. Switch on the safety nets

    On a paid plan, press Save recording so the whole show is kept, and turn on signal alerts so you hear about a dropped feed within a minute, by email or on Telegram. On the Control plan, pick a holding slide for drops: a 'we'll be right back' card, a looping video or a countdown.

  7. Go live before the doors open

    Start sending 10 to 15 minutes early behind a holding image or a countdown. Check every platform on a phone, then keep the health panel open: it flags a falling bitrate, a frozen picture and sound that clips while there is still time to fix them.

  8. After the encore

    The recording is in Storage when the stream ends. Download it for the artist, cut vertical teasers with Clips, or schedule the whole show to play again as a live stream for another time zone.

Encoder settings for a music stream

Type these into OBS, vMix or your hardware encoder. Since one stream goes to every platform, the values are chosen to fit all of them.

Picture size1920 × 1080The largest size every platform takes from a live stream.
Frame rate30 fps, or 25 if your cameras run at 25Stage light and slow camera moves look natural at 30, and LinkedIn stops at 30.
Video bitrate6,000 kbpsTwitch takes up to 6,000 kbps, and 6,000 sits inside Facebook's range at both 30 and 60 fps; the strictest platform sets the number.
Rate controlCBR (constant bitrate)A steady stream the platforms can pass on without stalling.
Keyframe interval2 secondsWhat every platform expects. OBS's 'auto' means 8 seconds, and StreamRove warns above 4.
AudioAAC, 48 kHz, stereo, 128 kbpsThe rate every destination accepts; 160 kbps if you only send to Twitch and Kick.
Sound levelLoudest peaks around −6 dBAbove 0 dB the sound distorts everywhere at once; the health panel flags clipping and silence.
Way inRTMPS on a solid line, SRT with 500 ms latency on a shaky oneSRT re-sends what a weak line loses, so short dips do not reach viewers.

What experienced crews do differently

They protect the sound first

Viewers forgive a soft picture; they leave over bad sound. Keep the stream's audio on its own fader, check it on headphones rather than speakers, and keep the loudest songs short of the red. If the set includes covers or recorded backing tracks, check the music rights before the show: platforms can mute or stop a stream that matches a commercial recording.

They plan for the internet to fail

A spare 4G/5G router and SRT turn a dying line into a few seconds of nothing. With signal alerts on, a dropped feed reaches your phone within a minute, and one platform can be switched off and back on without stopping the others.

They light for the camera, not only the crowd

Strobes and fast moving lights look great in the room and turn into blocky noise on a stream, because fast-changing light is the hardest thing to send as video. Ask the lighting designer for a steady front light on the performers and keep the haze thin near the cameras.

They give the online audience its own show

Fans at home notice the gaps the room fills with atmosphere: changeovers, tuning, the wait for the headliner. Cover them with a holding card or a short interview, read the chat beside the stream and give a shout-out from the stage. That is how viewers become ticket buyers for the next tour.

Three ways to get the show out of the venue

Pick by the venue's internet and where the performers are.

RTMPS (the default)The venue has a wired line you have testedOBS, vMix or a hardware encoder, and the address and key from your stream's pageThe stream stutters or drops; alerts tell you, and on Control a holding slide covers the gap
SRTShared Wi-Fi, 4G/5G, or a hall with a busy networkAn encoder with SRT (OBS, vMix, most hardware units) and 500 ms latencyLost pieces are re-sent and short dips never reach the screen
Browser StudioThe performers are in different places, or there is no mixerA laptop with Chrome or Edge; guests join from a linkEach guest's connection affects only their own picture

For every kind of event

Concerts

Tours that reach everyone.

Festivals

Multi-stage, multi-feed.

Conferences

Keynotes to a global room.

Sports & esports

Game day, every screen.

Frequently asked questions

Can we stream from a venue with poor internet?

Yes. Use SRT for the way in: it re-sends the pieces a weak line loses, where RTMP would stall, and the health panel shows the losses as they happen. If the line dies completely, signal alerts tell you within a minute, and on the Control plan a holding slide keeps the platforms live until you are back.

Can we reach several platforms without paying for several encoders?

That is the point of multistreaming: one feed up from the venue, fanned out to every platform from our side. Venue bandwidth carries one stream regardless of how many destinations you add.

Can we run a multi-camera show?

Yes. Switch cameras in your own mixer (OBS, vMix, hardware) and send us the programme feed, or use the Studio if your sources are already remote.

Do we get the show recorded for a later release?

On paid plans, press Save recording and the whole broadcast is kept, even if you press it after the show has started. It is in Storage when the show ends, and clips can be cut from it for promotion.

How much upload speed does a concert stream need?

About 9 Mbps for a 1080p stream at 6,000 kbps, a rate Twitch, YouTube and Facebook all accept. That leaves 30% spare for everything else on the line. Measure it from the venue's cable with the bitrate calculator, not from the office.

Can we sell tickets to the stream?

StreamRove does not take payments. On the Control plan you can put a passcode on the share page: sell tickets through your usual box office, then send buyers the link and the passcode. Leave public platforms off for a ticketed show: anyone can watch there.

Will a platform mute our stream because of the music?

It can. YouTube and Facebook check live streams for recorded music, and a match can mute or stop the broadcast on that platform. Cover songs and DJ sets carry the most risk, so clear the rights first. If one platform does cut you off, the other destinations keep receiving the stream.

Can fans watch on our own website?

Yes. Every stream has a share page and an embed code you can paste into your site, next to the platforms. On the free plan the player shows a small StreamRove mark.

Keep reading

From the blog

Take your event to a global audience

Send one finished show to every platform, and keep the recording for what comes next.

Sign up for free