Skip to content
Compare · Castr

A Castr alternative for live shows with guests

Castr and StreamRove both take one feed from your encoder and send it to every platform at once. Castr adds video hosting, a paywall and, from its Ultra plan, backup ingest. StreamRove adds a browser studio where guests join from a link, a holding slate for encoder drops on the Control plan and up, and health checks in plain words.

Castr is the better fit for some workflows, and this page says which. Castr's side was checked against its own pricing, features and product pages in October 2026.

Browser
Studio, guests by link
200
Videos in one rundown
9:16
Vertical clips
60 s
Until a signal alert

Where StreamRove fits better than Castr

Guests in the picture, not just feeds

A guest opens a link, checks camera and microphone on a join screen and appears beside you, with no account. Castr's Cloud Production switches incoming streams instead; by Castr's own description, contributors send a stream from an encoder or app rather than joining a guest room.

A slate on air when the encoder drops

On the Control plan and up, StreamRove sends a holding slate to every platform until your encoder is back. Castr's answer is a backup feed from a second encoder, on its Ultra plan; its own FAQ says it does not switch a failing feed to a recorded video.

Alerts and health checks on every plan

Signal alerts reach you after a minute without signal, by email, Telegram or webhook, on any plan, and the health score explains each problem in plain words. Castr's SMS and webhook alerts start on its Premium plan.

A free plan to test on

StreamRove's free plan needs no card: try your real encoder and destinations before paying. It puts a StreamRove watermark on the broadcast. Castr starts with a 7-day trial of its Starter plan.

What you get with StreamRove

One feed in, every platform out

RTMPS, RTMP or SRT from OBS, vMix or hardware, sent on to YouTube, Twitch, Kick, Facebook, LinkedIn and any RTMP service.

Browser Studio

Guests by link, up to four on screen, lower thirds, overlays, media from Storage and intro or break cards.

Merged chat

YouTube, Twitch and Kick chat in one read-only column on the broadcast page.

Health score and signal alerts

A live 0–100 score, the Stream Doctor's advice in plain words, and an alert after a minute without signal.

Output profile

The encoder settings that fit every platform you picked, with the platform behind each limit named.

Recordings, clips and analytics

Whole-show recordings on paid plans, vertical clips from recordings or uploads, and viewer numbers for your own player.

StreamRove vs. Castr, feature by feature

Checked against Castr's pricing, features and product pages as of October 2026. Castr's plans run Starter, Standard, Premium, Ultra and Events; StreamRove's limits are on the pricing page.

StreamRoveCastr
Send one stream to many platforms✓ Yes; how many at once depends on your plan✓ 6 to 30 destinations by plan
One-click platform connectionsYouTube, Twitch, KickYouTube, Facebook Pages and Groups, Twitch, LinkedIn
Guests in a browser studio✓ Join from a link; up to 4 on screen— Contributors join as streams, not in a guest room
Pull a feed from an IP camera— Not offered✓ RTSP cameras on every plan
When the encoder drops✓ Holding slate until you return, Control plan and upBackup feed from a second encoder, Ultra and up
Alerts when the feed drops✓ Email, Telegram or webhook on every planSMS or webhook, Premium and up
Health of your feed while live✓ 0–100 score, problems explained in plain words✓ Stream health monitoring on every plan
Chat from your platformsRead-only column: YouTube, Twitch, KickChat overlay: YouTube, Facebook Pages, Twitch
Clips✓ From a recording or upload, after the show✓ Live clipping during the stream, every plan
Pre-recorded video as live✓ Rundown of up to 200 videos; loop or filler at the end✓ 2 to 15 files per stream by plan; loop from Premium
Cloud recording✓ Paid plans; kept for your plan's retention period✓ Every plan, up to 72 hours; kept 3 days unless published
Paywall and video hosting— No payments or on-demand library; gated share links on Control and up✓ Paywall and hosting on every plan; adaptive bitrate from Premium
Free plan✓ Yes, with a StreamRove watermark— 7-day trial of Starter, no card

Switch from Castr in about 15 minutes

For a live workflow: encoder, destinations, website player and pre-recorded shows. Castr's paywall, video library and backup ingest have no StreamRove equivalent; keep Castr for those.

  1. Mark what moves and what stays

    List your destinations, every page that embeds Castr's player, and your scheduled pre-recorded streams. Anything behind the paywall or in the video library stays on Castr.

  2. Create a stream

    Sign up for free, press New Stream and choose Encoder | RTMP. For pre-recorded shows, create a second stream with Pre-recorded livestream.

  3. Add your channels

    Press Add Channel. YouTube, Twitch and Kick connect in one click; Facebook and LinkedIn take a server and key from the platform, with a new LinkedIn key for every event. The stream key finder shows where each one keeps them.

  4. Change the encoder's address

    On the stream page, open the connection details and copy the RTMPS server and key into OBS, vMix or your hardware encoder, or use the SRT tab on a shaky line. The table below lists every field.

  5. Test with the destinations off

    Switch every destination off and start the encoder. Check the preview, the health score and the Output profile card, which shows the settings that fit your platforms. Fix what the Stream Doctor flags, then switch one destination on and check it.

  6. Swap the player on your website

    Open Share on the stream page, create the public link and paste its Embed code where Castr's player was. It is a 640 × 360 iframe, with a small StreamRove mark on the free plan. Check the page on a phone.

  7. Move your pre-recorded shows

    Upload the videos to Storage (MP4, MOV, MKV and other common formats, up to 2 GB each), build the rundown in Upload & stream, and set a start time or keep it for Go live now.

  8. Go live with the safety nets on

    Switch on signal alerts, press Save recording on a paid plan, and on Control pick a holding slate in the Backup stream panel. Then switch the destinations on and go live; keep Castr until the first show is done.

Encoder fields when you leave Castr

For vMix, hardware encoders and OBS. The address and key come from your stream's connection details; these are the values around them. The SRT streaming guide goes deeper on SRT.

ProtocolRTMPS, or SRT on a shaky lineRTMPS is the default tab and is encrypted; plain RTMP is for encoders that cannot do RTMPS.
RTMPS serverrtmps://live.streamrove.com:1936/liveWith the stream key shown next to it.
RTMP serverrtmp://live.streamrove.com/liveNot encrypted; for older encoders only.
SRT host and portlive.streamrove.com, port 8890Mode Caller. Encoders that want a stream ID take it from Separate fields; OBS takes the Single URL.
SRT latency500 msRaise it on long or busy routes.
SRT passphraseLeave it emptyThis input is not encrypted; use RTMPS when the way in must be.
CodecsH.264 video, AAC audioH.264 goes out untouched. The StreamRove relay converts H.265 (HEVC) to H.264 itself, up to 1080p.
Keyframe interval (GOP)2 secondsThe health check warns above 4 seconds.
Scan type1080p, progressive1080i50 arrives as 25p. Broadcast delivery (Relay plan and up) passes interlaced video on untouched.
Bitrate and frame rate5,000 kbps with LinkedIn; 6,000 with Twitch or Facebook; 8,000 with Kick; 30 fps with LinkedInOne feed goes everywhere, and the strictest platform sets the numbers. Over SRT, the stream page advises video up to 6,000 kbps.

When to stay with Castr, and when to move

Stay with Castr if you sell access or host video

Castr includes a paywall and a video library on every plan, adaptive bitrate from Premium and DRM as an add-on. StreamRove takes no payments and keeps no public library; it can protect a share link with a passcode, or ask for a name and email first (Control plan and up). If tickets or subscriptions pay for your shows, keep Castr for that part.

Stay with Castr for IP cameras or a second encoder

Castr can pull an IP camera's RTSP feed, and from its Ultra plan it takes a backup feed from a second encoder, keeping delivery going if one fails. StreamRove takes one feed per stream, sent by your encoder. Its answer to a drop is a holding slate on Control and up: viewers stay informed, but the show itself pauses.

Move if your show is people, not feeds

Interviews, panels and podcasts get easier when guests only need a link. StreamRove Studio gives each guest a join screen to check camera and microphone, puts up to four people on screen with name cards and overlays, and lets you rehearse privately for five minutes before you go live. On Castr, every contributor needs an encoder or app of their own.

Change the website player last

Move the encoder and the destinations first, and swap Castr's player on your site only after a full test. That way visitors never land on a silent page. Know the difference before you do: StreamRove has no public video library, and recordings are downloaded or shared one by one from Storage.

Frequently asked questions

Can StreamRove replace Castr?

For sending one encoder feed to many platforms, yes, and it adds a browser studio with guests. For a video library, a paywall, IP cameras or a backup encoder, no: those are Castr's strengths. Some teams move their live shows and keep Castr for hosting.

Does StreamRove have a paywall or pay-per-view?

No, StreamRove takes no payments. On the Control plan and up you can protect a share link with a passcode, or ask viewers for a name and email first. Sell access through your own shop or box office, then send buyers the link and passcode.

Can I embed the live stream on my website?

Yes, on every plan: Share on the stream page gives a public link and an Embed code for a 640 × 360 player, with a small StreamRove mark on the free plan. There is no public video library: recordings are downloaded or shared one by one from Storage.

Is there a backup ingest, like Castr's?

No. Each stream takes one feed at a time. On the Control plan and up, a holding slate covers every platform while your encoder is gone, and signal alerts tell you after a minute without signal. Castr's backup ingest is on its Ultra and Events plans.

Can StreamRove pull a stream from an IP camera or a server?

No. StreamRove does not pull streams: your encoder sends over RTMPS, RTMP or SRT, or you produce in the browser studio. A camera that only offers RTSP needs an encoder in between to send its picture on.

How do pre-recorded broadcasts compare?

Both play a video as a live stream at a set time. StreamRove takes a rundown of up to 200 videos, up to 2 GB each, with trim points, skip and jump while live, and a loop or filler at the end. Castr sets the files per pre-recorded stream by plan, with infinite loop from Premium.

Can I clip during the live stream, like Castr's live clipping?

No. In StreamRove you clip afterwards: pick the recording or an upload in Clips, press Start here and End here, and export a vertical 9:16 version or the original framing. Download it, or publish to Instagram Reels from a Facebook Page linked to an Instagram professional account.

Is SRT encrypted on StreamRove?

Not on the way in: the SRT input takes no passphrase. Use RTMPS, the default, when the stream must be encrypted, and SRT when the line is shaky and recovering lost data matters more. Both reach the same destinations, recording and health checks.

How long are recordings kept?

Recording needs a paid plan. Press Save recording and the whole broadcast is kept, even if you press it halfway through. It lands in Storage as an MP4 for your plan's retention period, with a warning three days before deletion. Castr keeps recordings three days unless you publish them to its library.

Can I try StreamRove before leaving Castr?

Yes. The free plan needs no card. Send a rehearsal with the destinations switched off, check the preview and the health score, then move one show across. Castr's own trial runs seven days on its Starter plan.

Keep reading

From the blog

Move your live shows, keep what works

Free to start, no card needed. Change one address in your encoder and bring your guests in from a link.

Sign up for free