Skip to content
Use Case · Product Launches

Live stream your product launch to the whole world

Build up to the reveal, show the product working, and take questions while it airs, on every platform at the same moment.

Launching nowAll-new Vlo Cam 3
LIVE🔥❤️👏
Status
Live now
Watch live
1
Stream
Custom
RTMP platforms
Passthrough
Streaming quality
Vertical
Recap clips

Everything for a launch that lands

A countdown before the reveal

Open on an intro card with a countdown in Studio, or start a recorded film at the exact minute you announced.

Live demo from Studio

Show the product in action from your browser with guests and screen share.

Multistream everywhere

Reveal to YouTube, LinkedIn, X, and your own site simultaneously.

Questions from the chat

While a recorded reveal plays, YouTube, Twitch and Kick chat sits in one column beside the stream, where a teammate can pick up the questions.

Branded overlays

On-brand lower-thirds, logos, and calls to action on every screen.

Recap clips

Pick the recording in Clips and cut the big moments into vertical videos for the follow-up posts.

Launch day, step by step

A launch has one chance to start on time. Most of the work happens the week before; on the day, you follow the list.

  1. Choose live, recorded or both

    Decide how much of the show has to be live. The comparison further down this page sets out the three ways teams do it; most choose a recorded demo with live questions.

  2. Write a run of show

    List every segment with its length: countdown, welcome, demo, customer story, questions, what to do next. Five to seven segments in 30 to 40 minutes keeps a launch tight.

  3. Add the platforms

    Connect YouTube in one click. LinkedIn and X need a server and key pasted from the platform; LinkedIn issues a new one for every event: create the event there first. Your own website gets the embeddable player.

  4. Build the scenes in Studio

    Make one scene per segment: an intro card with a countdown, the host on their own, host and guest side by side, the product on screen share, the recorded demo as a media scene. Add lower thirds with names and titles, and a banner with the link you want people to visit.

  5. Rehearse privately

    Start a private test: it broadcasts to StreamRove only, for up to five minutes, and shows what viewers would see about 10 to 20 seconds later. Nothing reaches the platforms, which makes it safe to test the full setup on the day itself.

  6. Start on the announced minute

    For a fully recorded launch, schedule it in Upload & stream for the exact time and it starts by itself. For a Studio show, open the Studio 30 minutes early, let the guests in from their links and go live a few minutes before the hour behind the countdown card.

  7. Answer questions as they come

    Give one person the chat. During a recorded launch they can read YouTube, Twitch and Kick together on the stream page and reply on each platform; during a Studio show, keep each platform's chat open on a second screen and put the best questions on air with the Q&A overlay.

  8. Keep the replay working for you

    Switch recording on before you start; even if you forget until halfway, the whole broadcast is kept. Afterwards, cut recap clips with Clips and send the replay to everyone who registered but missed it.

A launch timeline that works

Counted back from the minute you go live.

Two weeks beforeAnnounce the date and time; create the event pages on YouTube and LinkedInAdd those platforms as destinations
One week beforeRecord the demo; rehearse the live parts with every speakerUpload the demo to Storage; build the Studio scenes
One day beforeA full rehearsal on the real setupRun a private test; check that every destination is switched on
One hour beforeSpeakers join; cameras and microphones checkedSend the guest links; each guest tests their devices on the join screen
15 minutes beforeGo live behind the countdownPress Go live; watch each platform on a phone
The launch minuteThe reveal startsThe scheduled film starts by itself, or switch to the demo scene
Within a dayPost the replay and the clipsDownload the recording; cut clips in Clips

What makes a launch stream worth watching

Start on time, even with few people watching

Viewers drift in during the first five minutes, and most will watch the replay anyway. Cover the gap with the countdown card, then start exactly when you said you would: a late start reads as a launch that is not ready.

Show, do not slide

Slides explain; a product moving on screen convinces. Keep slides for the numbers and the price, and spend the minutes on the product doing the job it was built for. Enlarge text and the cursor on the screen you share so they stay readable on a phone.

Answer the hard questions first

Collect what beta users asked most, then answer the uncomfortable ones (price, availability, moving from an old version) on stage before anyone types them. It builds more trust than any feature list.

Give people one thing to do at the end

Close on one link: the signup, the waitlist or the order page. Put it in a banner for the last ten minutes and in the description on every platform, so the replay keeps selling after the stream has ended.

Live, recorded, or both?

Three ways to run the same launch. The middle one is where most product teams settle.

Fully liveA demo can fail in front of everyone, and everything depends on the presenters' connectionsThe most exciting, with real reactionsStudio with guests, and screen share for the demo
Recorded demo, live questionsAlmost nothing during the demo; only the questions are livePolished, and still personal at the endIn Studio, play the recorded demo as a media scene, then switch to the hosts for questions
Fully recordedNothing during the show; the risk moves into the editSmooth, though people can tell it is not liveUpload & stream, scheduled for the announced minute, with a teammate reading the chat

Perfect for any reveal

Hardware reveals

Show the device up close.

App launches

Demo the experience live.

Feature drops

Announce what's new.

Brand moments

Make headlines everywhere.

Frequently asked questions

Should a launch be live or pre-recorded?

Pre-record the demo, be live in the chat. Scheduling the recording to play out removes the one risk you cannot rehearse away — the product failing on stage — while the audience still gets a real conversation around it.

Can we start exactly on the announced minute?

Yes. Schedule the play-out for that time and it starts on its own, or set it up in advance and press Go live when you are ready. Either way the video runs in real time and the stream ends with it.

Can several presenters join from different places?

Yes. Each presenter opens a browser link, picks a camera and microphone on the join screen and waits until you bring them on. Up to four people can be on screen together, host included, each with their own name card, and layouts switch while you are live.

What do we do with the video afterwards?

If recording was on, the whole broadcast is in Storage when you stop. Download it, schedule it to play again for another time zone, or pick it in Clips and cut vertical recaps for social.

Can we stream the launch to LinkedIn?

Yes, as a custom destination. LinkedIn Live has to be available on your profile or page; then create a live event in LinkedIn, choose to stream from another tool, and paste the server and key it gives you into StreamRove. LinkedIn issues a new key for every event; repeat these steps for each launch.

Can viewers ask questions from every platform in one place?

Partly. On a broadcast sent from an encoder or a recorded play-out, StreamRove shows YouTube, Twitch and Kick chat together beside the stream, and replies are made on each platform. Questions from LinkedIn, Facebook and X stay on those platforms; keep their tabs open too.

How do we rehearse without our audience seeing it?

Run a private test from the Studio: it goes to StreamRove only, for up to five minutes, and shows what viewers would see. With an encoder, switch every destination off and watch the preview on the stream page.

Can we put the stream on our own launch page?

Yes. Every stream has a share page and an embed code you can paste into your website. On the free plan the player shows a small StreamRove mark.

Keep reading

From the blog

Make your next launch unmissable

Reveal your product live to every platform and turn the moment into momentum.

Sign up for free